1, put the rice milling machine on the table, insert the power plug.

2, determine the grinding time, adjust the timing knob.

3, remove the pressure in the hopper thallium, brown rice 17-20g (moisture content is not more than 15% is appropriate) into the hopper, let it into the white room. First press the power button to start, and then put down the thallium.

4, to the specified time, rice milling machine automatically stops, take out the hopper, remove the chaff. Then plug the hopper, and then remove the pressure of thallium, will turn the handle to the right front, make the rice milling chamber to the receiving hopper, the timing knob to 0, press the power button to speed the sand bye seconds, grinding the white rice all indoor falls, then pull out the rice receiving bucket, after sifting the the test of rice.

1, brown rice into the hopper, should check whether the metal and stone, so as not to damage the grinding wheel.

2, the end of the mill should be pulled out in front of the rotation of the block, will be left to grind the white room to clean up the rice sugar, so as not to affect the accuracy of the sample.

3, grind the white precision to be determined by the varieties of brown rice to determine the number of samples and the white time, low precision sample number 17-18g is appropriate, the grinding time is slightly shorter; high precision sample number 20g is appropriate, grinding time is slightly longer.

4, when the machine is used for a long time and high moisture after grinding rice, effects of rice bran bond whitening degree, available in hand to remove the wheel, use wire brush to bran powder, as is to be continued to use.